KTI
KT310b TriACCEL

KT310B/KT320B TriACCEL

Tri-Axial Accelerometer Sensor
FOR MOTION AND VIBRATION MEASUREMENT

KT310B Tri-Axial Accelerometer Sensor

SPECIFICATIONS

Two models for better low end accuracy/higher top end range.

  KT310B KT320B
Acceleration Range: +/- 1 G in all directions +/- 2 G in all directions
Voltage Resolution: 2.20 V/G (4,557 mm/secˆ2/VDC) 1.10 V/G (8,915 mm/secˆ2/VDC)
Displacement Accuracy: +/- 0.013 mm +/- 0.025 mm

 

Frequency Range: 0.0 to 500.0 Hz
Filtering: Internal low pass anti-aliasing set to 500 Hz
Power: 5.00 VDC
Axis Alignment: +/- 0.10°
Overload: 20,000 G
Operating Temp: -40/+125°C
Enclosure: Stainless steel with stainless steel connector
Mounting: Bolt
Dimensions: 35 mm x 35 mm x 23 mm
Tri-Axial Accelerometer Sensor
 
SENSOR AND CABLE PROTECTION

Since 1989, we’ve been offering proven technologies and robust products designed to survive continuous operation—24 hours a day, 7 days a week—within the harsh conditions of the steelmaking environment.

Made from stainless steel, the KT310B/KT320B sensors are used in the KT500 OnLineMOMS system and are securely bolted into a protective steel enclosure that is welded onto the oscillator. This enclosure features a sealed lid that protects against water or fluids, as well as an elongated exit neck for secure clamping of hydraulic hose—shielding the sensor cable out of containment and further preventing fluids from entering. Pyro-sleeve covering can be added for increased fire protection. The enclosure’s cable clamp prevents damage from excessive stress by providing strain relief for the sensor cable.

Properly installed, the KT310B/KT320B sensors and cables provide years of reliable service on the oscillators, and the design allows sensors and cables to be easily removed and reinstalled for maintenance and calibration.